Quectel M10

M10 AT Commands Set
M10_ATC_V1.01 - 7 -
7.2.16 AT+QISERVER Configure As Server...............................................................................148
7.2.17 AT+QICSGP Set CSD Or GPRS For Connection Mode...................................................149
7.2.18 AT+QISRVC Choose Connection .....................................................................................150
7.2.19 AT+QISHOWRA Set Whether Display IP Address And Port Of Sender When Receive Data
......................................................................................................................................................151
7.2.20 AT+QISCON Save TCPIP Application Context................................................................151
7.2.21 AT+QIMODE Select TCPIP Application Mode................................................................153
7.2.22 AT+QITCFG Configure Transparent Transfer mode.........................................................153
7.2.23 AT+QISHOWPT Control whether to show the protocol type of the received data...........154
7.2.24 AT+QIMUX Control whether to support establish multiple TCPIP connection ...............154
7.2.25 AT+QISHOWLA Set Whether Display local IP Address When Receive Data .................155
7.2.26 AT+QIFGCNT Configure a context as foreground context...............................................156
7.2.27 AT+QISACK Query the length of sent data and the length of acknowledged data...........156
Appendix A Supported unsolicited result codes ............................................................................158
A.1 Summary of CME ERROR Codes ............................................................................................158
A.2 Summary of CMS ERROR Codes.............................................................................................160
A.3 Summary of URC......................................................................................................................161
Quectel