QuickLabel Systems QL-300 User Manual

Print Function Settings
QL-300 User Guide 148
Black Mark Interval 15.9 millimeter
(0.63 inch)
|
101.6 millimeter (4.00 inch)
|
151.2 millimeter
(5.95 inch)
155.6 millimeter
(6.13 inch)
|
1324.0 millimeter
(52.13 inch)
Sets the interval of the
marks on custom paper for
the unwinder.
Sets the same direction as
for the dimension in the
paper feed direction.
If the setting is 104.8 mm
(4.13 inch) or lower, then
the set page length is han-
dled as a whole-number
multiple of the actual length
of the page such that it
exceeds 101.6 mm (4.00
inch).
The initial values vary
depending on your operat-
ing environment.
Gap Length 3.0 millimeter
(0.12 inch)
|
10.0 millimeter
(0.39 inch)
Sets the interval for labels.
Sets the same direction as
for the dimension in the
paper feed direction.
Adjust Cut Position -0.5 millimeter
(-0.02 inch)
0.0 millimeter
(0.00 inch)
+0.5 millimeter
(+0.02 inch)
Specifies the compensa-
tion value for the distance
from the print completion
position to the cut position
(beginning of next label).
(Specifies margin on follow-
ing edge).
If you specify a negative
value, cutting is done at a
short position.
Item Value Description

QuickLabel Systems QL-300 Specifications

General

Brand	QuickLabel Systems
Model	QL-300
Category	Label Maker
Language	English