QuickLabel Systems QL-300 User Manual

Print Function Settings
QL-300 User Guide 147
X Dimension 25.4 millimeter
(1.00 inch)
|
101.6 millimeter
(4.00 inch)
105.0 millimeter
(4.13 inch)
|
126.0 millimeter
(4.96 inch)*
Sets the width of the cus-
tom paper sizes for the
unwinder.
Sets the dimension perpen-
dicular to the paper feed
direction.
* 130.0 mm (5.12 inch) if
the Media Form is Continu-
ous Paper or Continuous
Paper (Black Mark)
The initial values vary
depending on your operat-
ing environment.
Y Dimension 12.7 millimeter
(0.50 inch)
|
101.6 millimeter
(4.00 inch)
|
148.0 millimeter
(5.83 inch)
152.4 millimeter
(6.00 inch)
|
1320.8 millimeter
(52.00 inch)
Sets the length of the cus-
tom paper sizes for the
unwinder.
Sets the same direction as
for the dimension in the
paper feed direction.
If the setting is 101.6 mm
(4.00 inch) or lower, then
the set page length is han-
dled as a whole-number
multiple of the actual length
of the page such that it
exceeds 101.6 mm (4.00
inch).
The initial values vary
depending on your operat-
ing environment.
Item Value Description

QuickLabel Systems QL-300 Specifications

General

Brand	QuickLabel Systems
Model	QL-300
Category	Label Maker
Language	English