Print Function Settings
QL-300 User Guide 154
Cutter Setup
Bold indicates factory-set values.
System Adjust
Item Value Description
Cut Mode Job
Collation
Specified Interval
Specifies the cutting opera-
tion.
Job: Cuts at the end of a
job.
Collation: Cuts at the end of
the job and at the end of
the job collation.
Specified Interval: Cuts in
units of the specified num-
ber of pages. Cuts at the
end of the collation/job.
Cut Interval 1
|
9999
Sets how many pages are
cut each time.
Appears when the Cut
Mode is “Specified Inter-
val”.
Item Value Description
Power Save Time 1 minute
2 minutes
3 minutes
4 minutes
5 minutes
10 minutes
15 minutes
30 minutes
60 minutes
Sets the time until the
printer enters power save
mode.
To Next Page
Loading...
