QuickLabel Systems QL-300 User Manual

Print Function Settings
QL-300 User Guide 166
Copies 1
|
9999
Sets the copy quantity.
This setting is ignored in
case of local print.
This setting is disabled
unless the Job Copy set-
ting is 1.
Job Copy 1
|
999
Sets the print quantity.
This setting is ignored in
case of local print.
The settings in the printer
driver always overwrite
these settings.
* This setting is enabled
only if Collate is checked
and 1 is specified as the
number of copies in the
PCL printer driver.
Edge to Edge On
Off
Sets the print margin.
Resolution 600dpi
1200dpi
Sets the resolution.
Toner Save Toner Save Level Off
Low
Middle
High
Set the toner save quantity.
Specifies Off when toner
save mode is disabled.
Color All
Except 100%
Black
All: All colors, including
100% black, comprise all
the target colors for toner
saving.
Except 100% Black: All col-
ors, excluding 100% black,
comprise all the target col-
ors for toner saving.
Item Value Description

QuickLabel Systems QL-300 Specifications

General

Brand	QuickLabel Systems
Model	QL-300
Category	Label Maker
Language	English