QuickLabel Systems QL-300 - Page 170

Print Function Settings
QL-300 User Guide 170
Bold indicates factory-set values.
Panel Setup
Bold indicates factory-set values.
CMYK Conversion On
Off
You can select the method
of total toner quantity con-
trol for CMYK data. Select
Off to disable GCR (Gray
Component Replacement).
Furthermore, this menu
setting is disabled if using
the ink simulation function.
Item Value Description
Item Value Description
Idle Display Supplies Life
Unwinder Config
Sets the information dis-
played in the standby
screen.
Panel Brightness During Operation 5
|
31
Adjusts the brightness
(backlight luminosity) of the
control panel LCD.
The set brightness is
applied during control panel
operations.
Panel Brightness While Power Save 0
|
1
|
31
Adjusts the brightness
(backlight luminosity) of the
control panel LCD.
The set brightness is
applied after the panel
backlight timer time has
elapsed from the last oper-
ation.
Panel Backlight Timer 10
|
30
|
300
Adjusts the time (in sec-
onds) from the last opera-
tion until Panel Brightness
While Power Save is
applied.