QuickLabel Systems QL-300 - Page 178

Print Function Settings
QL-300 User Guide 178
Adjust Registration Execute Implements auto color mis-
alignment compensation
operations. Implement
when the device is in
stand-by status.
Color Density Cyan Density -3
|
0
|
+3
Adjusts the cyan density.
This setting is enabled from
printing after the density
compensation has been
implemented.
Color Density Magenta Density -3
|
0
|
+3
Adjusts magenta density.
This setting is enabled from
printing after the density
compensation has been
implemented.
Color Density Yellow Density -3
|
0
|
+3
Adjusts yellow density.
This setting is enabled from
printing after the density
compensation has been
implemented.
Color Density Black Density -3
|
0
|
+3
Adjusts black density.
This setting is enabled from
printing after the density
compensation has been
implemented.
Color Density White Density -3
|
0
|
+3
Adjusts white density.
This setting is enabled from
printing after the density
compensation has been
implemented.
Displayed with QL-300s
only.
Item Value Description