QuickLabel Systems QL-300 User Manual

Cleaning
QL-300 User Guide 399
If there is paper left inside the cutter unit after you have disassembled it, use the tweezers
to remove that paper.
10 Clean the blades of the cutter.
a) If there is glue stuck to the inside of the cutter unit, use the tweezers to remove as
much as possible.
b) Clean the glue off the cutter blades.
There are two types of cutter blades; the spiral blade (rotating blade) and the
straight blade (fixed blade).
Caution: There are blades inside the cutter unit for cutting roll paper. Do not touch the
blades of the cutter with your hands. There is a risk of injury.

QuickLabel Systems QL-300 Specifications

General

Brand	QuickLabel Systems
Model	QL-300
Category	Label Maker
Language	English