Web Utility
QL-300 User Guide 423
For Pre-Shared Key, enter at least one and no more than 64 single-byte alphanumeric
characters. Here, we will show an example where “ipsec” is entered for the character string.
8 Under STEP5, set the Key PFS.
a) For Key PFS, select KEYPFS or NOPFS.
b) If Key PFS is selected, select one of the following settings for Key PFS
Diffie-Hellman Group: Group 2, Group 1, None.
9 Under STEP6, configure Phase2 Proposal settings.
To Next Page
Loading...
