1. Setup ABL90 FLEX reference manual
1-34
To edit a RiLiBÄK rule, do the following:
Step Action
1. Select the desired rule in the RiLiBÄK ranges screen and press
Edit to display the screen below:
2.
Use
or to jump between the input boxes and edit the
desired values.
3. Press Back to return to the RiLiBÄK ranges screen.
To remove a RiliBÄK rule, do the following:
Step Action
1. Highlight the desired rule in the RiLiBÄK ranges screen and press
Delete.
NOTICE: When a QC measurement violates an applied RiLiBÄK rule, a red R is
shown in front of the parameter name in the result.
To Next Page
Loading...
