RADIOMETER ABL90 FLEX User Manual

ABL90 FLEX reference manual 1. Setup
1-77
Automatic backup default settings:
Item Default setting
Auto backup on
Communication setup default settings:
Item Default setting
RADIANCE system Off
LIS/HIS None
Automatic data request "When entering sampler
ID" – on
Automatic data transmission Patient results, Calibration
results, QC results, Activity
log messages
Patient lookup Local database
Remote control Enable remote access
The following setups have no Radiometer settings:
 Barometer setup
 Time and date setup
 Analyzer identification setup
Setups without
Radiometer
settings

RADIOMETER ABL90 FLEX Specifications

General

Type	Blood Gas Analyzer
Analysis Time	35 seconds
Parameters Measured	pH, pCO2, pO2
Sample Volume	65 μL
Connectivity	Ethernet, USB
Calibration	Automatic
Data Management	Integrated data management system
Sample Type	Whole blood, plasma, serum
Power Requirements	100-240 V AC, 50-60 Hz, 150VA
Operating Temperature	15-32 °C (59-90 °F)
Operating Humidity	20-85% relative humidity, non-condensing