Ricoh MPC 2800 AT-C2 User Manual

Item to Adjust Level on the C-4 chart (K) Adjustment Standard
1
ID max: (K, C, M, and
Y)
Adjust the offset value so that the
density of level 10 matches that
of level 10 on the C-4 chart.
2
Middle (Middle ID)
(K, C, M, and Y)
Adjust the offset value so that the
density of level 6 matches that of
level 6 on the C-4 chart.
3
Shadow (High ID)
(K, C, M, and Y)
Adjust the offset value so that the
density of level 8 matches that of
level 8 on the C-4 chart.
4
Highlight (Low ID)
(K, C, M, and Y)
Adjust the offset value so that dirty
background does not show on
the copy and the density of level
3 is slightly lighter than that of
level 3 on the C-4 chart.
- Text (Letter) Mode, Single Color -
Item to Adjust Level on the C-4 chart (K) Adjustment Standard
1 ID max: (K)
Adjust the offset value so that the
density of level 10 matches that
of level 10 on the C-4 chart.
2 Middle (Middle ID) (K)
Adjust the offset value so that the
density of level 6 matches that of
level 6 on the C-4 chart.
3 Shadow (High ID) (K)
Adjust the offset value so that the
density of level 8 matches that of
level 8 on the C-4 chart.
4 Highlight (Low ID) (K)
Adjust the offset value so that dirty
background does not show on
the copy and the density of level
3 is slightly lighter than that of
level 3 on the C-4 chart.
4. Replacement and Adjustment
166
4

Ricoh MPC 2800 AT-C2 Specifications

General

Brand	Ricoh
Model	MPC 2800 AT-C2
Category	All in One Printer
Language	English