Scanner SP Mode
SP1-xxx (System and Others)
1004
[Compression Type]
Selects the compression type for binary picture processing.
1004 1 Compression Type *CTL
[1 to 3 / 1 / 1/step ]
1: MH, 2: MR, 3: MMR
1005
[Erase margin]
Creates an erase margin for all edges of the scanned image.
If the machine has scanned the edge of the original, create a margin. This SP is activated
only when the machine uses TWAIN scanning.
1005 1 Range from 0 to 5 mm *CTL [0 to 5 / 0 / 1 mm/step ]
1009 [Remote scan disable] *CTL
[0 or 1 / 0 / - ]
0: enable, 1: disable
1009 1 Enable or disable remote scan.
1010 [Non Display Clear Light PDF] *CTL
[0 or 1 / 0 / - ]
0: Display, 1: No display
1010 1 Enable or disable remote scan.
SP2-XXX (Scanning-image quality)
2021
[Compression Level (Gray-scale)]
Selects the compression ratio for grayscale processing mode (JPEG) for the three settings that
can be selected at the operation panel.
8. Appendix: SP Mode Tables
496
To Next Page
Loading...
Need help?
General
