Instrument Functions
R&S
®
FSVA/FSV
372Operating Manual 1176.7510.02 ─ 09
Example
Figure 3-16: Sweep list using Fast SEM mode
In Figure 3-16, a sweep list is shown for which Fast SEM is activated. The formerly 5
separately defined ranges are combined to 2 sweep ranges internally.
3.3.5.6 Measuring Spurious Emissions
The Spurious Emissions measurement defines a measurement that monitors unwan-
ted RF products outside the assigned frequency band generated by an amplifier. The
spurious emissions are usually measured across a wide frequency range. The Spuri-
ous Emissions measurement allows a flexible definition of all parameters. A result table
indicates the largest deviations of the absolute power from the limit line for each range,
and the results can be checked against defined limits automatically.
Measurement Functions
To Next Page
Loading...
