Rohde & Schwarz FSVA - CALCulate:MARKer Subsystem

Remote Control
R&S
®
FSVA/FSV
663Operating Manual 1176.7510.02 ─ 09
The R&S FSVA/FSV uses the threshold for the limit check, if the limit line violates the
threshold.
Suffix:
<n>
.
irrelevant
<k> 1...8
Selects the limit line.
Parameters:
<Threshold> Numeric value that defines the threshold.
The unit depends on CALCulate<n>:LIMit<k>:UNIT.
*RST: -200 dBm
Example:
CALC:LIM2:UPP:THR -35DBM
Defines an absolute threshold value for limit line 2.
CALCulate:MARKer Subsystem
The CALCulate:MARKer subsystem checks the marker functions of the instrument.
CALCulate<n>:MARKer<m>[:STATe]...............................................................................664
CALCulate<n>:MARKer<m>:AOFF..................................................................................664
CALCulate<n>:MARKer<m>:COUNt................................................................................664
CALCulate<n>:MARKer<m>:COUNt:FREQuency?............................................................665
CALCulate<n>:MARKer<m>:COUNt:RESolution...............................................................666
CALCulate<n>:MARKer<m>:LINK................................................................................... 666
CALCulate<n>:MARKer<m>:LOEXclude.......................................................................... 666
CALCulate<n>:MARKer<m>:MAXimum[:PEAK]................................................................ 667
CALCulate<n>:MARKer<m>:MAXimum:AUTO..................................................................667
CALCulate<n>:MARKer<m>:MAXimum:LEFT...................................................................668
CALCulate<n>:MARKer<m>:MAXimum:NEXT..................................................................668
CALCulate<n>:MARKer<m>:MAXimum:RIGHt..................................................................669
CALCulate<n>:MARKer<m>:MINimum[:PEAK]................................................................. 669
CALCulate<n>:MARKer<m>:MINimum:AUTO...................................................................670
CALCulate<n>:MARKer<m>:MINimum:LEFT....................................................................670
CALCulate<n>:MARKer<m>:MINimum:NEXT................................................................... 671
CALCulate<n>:MARKer<m>:MINimum:RIGHt...................................................................671
CALCulate<n>:MARKer<m>:PEXCursion.........................................................................672
CALCulate<n>:MARKer<m>:SEARch.............................................................................. 672
CALCulate<n>:MARKer<m>:TRACe................................................................................673
CALCulate<n>:MARKer<m>:X........................................................................................ 673
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe]................................................................674
CALCulate<n>:MARKer<m>:X:SLIMits:LEFT....................................................................674
CALCulate<n>:MARKer<m>:X:SLIMits:RIGHT..................................................................675
CALCulate<n>:MARKer<m>:X:SLIMits:ZOOM..................................................................675
CALCulate<n>:MARKer<m>:X:SSIZe.............................................................................. 676
CALCulate<n>:MARKer<m>:Y?.......................................................................................676
CALCulate<n>:MARKer<m>:Y:PERCent..........................................................................677
Remote Control – Commands