Rohde & Schwarz FSVA - CALCulate:STATistics Subsystem

Remote Control
R&S
®
FSVA/FSV
736Operating Manual 1176.7510.02 ─ 09
CALCulate<n>:SGRam:TSTamp:DATA? <Mode>
This command queries the time stamp of the frames.
All available frame results are returned via the TRACe<n>[:DATA]? command.
Suffix:
<n>
.
1...4
Selects the measurement window.
Query parameters:
<Mode> CURRent
Returns the time stamp of the current frame.
ALL
Returns the time stamps of all frames. The result are sorted in
descending order, beginning with the current frame.
Return values:
<TimeStamp> The return values consist of four values for each frame.
The first value is the date of the measurement in seconds that
have passed since 01.01.1970 in seconds. For a better resolu-
tion the second value shows the additional milliseconds. This
value is also displayed on screen.
These numbers are appropiate for relative uses, but you can
also calculate the absolute date and time as displayed on the
screen.
The third and fourth value are reserved for future uses.
If the Spectrogram is empty, the command returns '0,0,0,0'
Example:
CALC:SGR:TST ON
Activates the time stamp.
CALC:SGR:TST:DATA? ALL
Returns the time stamp of all frames sorted in a descending
order.
Usage: Query only
CALCulate:STATistics Subsystem
The CALCulate:STATistics subsystem controls the statistical measurement func-
tions in the instrument.
CALCulate<n>:STATistics:APD[:STATe].......................................................................... 737
CALCulate<n>:STATistics:CCDF[:STATe]........................................................................737
CALCulate<n>:STATistics:CCDF:X<Trace>......................................................................737
CALCulate<n>:STATistics:NSAMples.............................................................................. 738
CALCulate<n>:STATistics:PRESet.................................................................................. 738
CALCulate<n>:STATistics:RESult<Trace>........................................................................739
CALCulate<n>:STATistics:SCALe:AUTO ONCE............................................................... 739
CALCulate<n>:STATistics:SCALe:X:RANGe.................................................................... 740
CALCulate<n>:STATistics:SCALe:X:RLEVel.....................................................................740
Remote Control – Commands