Appendix: LAN Interface
R&S
®
FSVA/FSV
1056Operating Manual 1176.7510.02 ─ 09
7 Appendix: LAN Interface
In this appendix, additional information on the LAN interface is given. How to connect
the instrument to the network and configure the network protocols is described in
Chapter 2.2.6, "Setting Up a Network (LAN) Connection", on page 48.
Network restrictions and entering passwords
Only user accounts with administrator rights can configure LAN networks. For details
see Chapter 2.2.5.3, "Login", on page 45.
In some of the following step-by-step instructions, user names and passwords must be
entered. This requires using the touchscreen and the on-screen keyboard, or a mouse
and an external keyboard (see Chapter 2.4, "Basic Operations", on page 61 and Chap-
ter 2.2.2, "Connecting USB Devices", on page 34.
7.1 Configuring the Network
After network support has been installed, data can be exchanged between the instru-
ment and other computers, and network printers can be used.
Network operation is only possible if you are authorized to access network resources.
Typical resources are file directories of other computers or even central printers.
Authorization is assigned by the network or server administrator.
The operation on the network includes the following administrative tasks:
●
Chapter 7.1.1, "Changing the Computer Name", on page 1057
●
Chapter 7.1.2, "Changing the Domain or Workgroup", on page 1057
●
Chapter 7.1.3, "Operating the Instrument Without a Network", on page 1058
●
Chapter 7.1.4, "Creating Users", on page 1058
●
Chapter 7.1.5, "Changing the User Password", on page 1059
●
Chapter 2.2.5.3, "Login", on page 45
●
"The Automatic Login Function" on page 46
●
Chapter 7.1.8, "Mapping Network Drives", on page 1061
●
Chapter 7.1.9, "Sharing Directories (only with Microsoft Networks)", on page 1062
Connection to networks
Before connecting the instrument to the network or configuring the network, consult
your network administrator, particularly for large LAN installations. Errors may affect
the entire network.
Never connect your analyzer to a network unprotected against virus infection because
this may cause damage to the instrument software.
Configuring the Network
To Next Page
Loading...
