Remote Control
R&S
®
FSVA/FSV
771Operating Manual 1176.7510.02 ─ 09
MMEMory:STORe<n>:SPURious <FileName>
This command exports the marker peak list available for spurious emission measure-
ments to a file.
Suffix:
<n>
.
irrelevant
Parameters:
<FileName> String containing the path and name of the target file.
Example:
MMEM:STOR:SPUR 'test'
Saves the current marker peak list in the file test.dat.
Usage: Event
MMEMory:STORe<n>:TRACe <Trace>, <FileName>
This command stores the selected trace in the specified window in a file with ASCII for-
mat. The file format is described in Chapter 3.2.8.7, "ASCII File Export Format",
on page 266
The decimal separator (decimal point or comma) for floating-point numerals contained
in the file is defined with the FORMat:DEXPort:DSEParator command (see
FORMat:DEXPort:DSEParator on page 755).
Suffix:
<n>
.
window; For applications that do not have more than 1 measure-
ment window, the suffix <n> is irrelevant.
Parameters:
<Trace> 1 to 6
Selected a trace.
<FileName> DOS file name
The file name includes indication of the path and the drive name.
Indication of the path complies with DOS conventions.
Example:
MMEM:STOR:TRAC 3,'TEST.ASC'
Stores trace 3 in the file TEST.ASC.
Manual operation: See "ASCII Trace Export" on page 200
4.2.3.12 OUTPut Subsystem
The OUTPut subsystem controls the output-related features of the instrument.
OUTPut:DIQ..................................................................................................................772
OUTPut:DIQ:CDEVice....................................................................................................772
OUTPut[:STATe]............................................................................................................773
OUTPut:UPORt............................................................................................................. 773
OUTPut:UPORt:STATe.................................................................................................. 774
Remote Control – Commands
To Next Page
Loading...
