Rohde & Schwarz FSVA - 4.2.4.2 DIAGnostic Subsystem

Remote Control
R&S
®
FSVA/FSV
916Operating Manual 1176.7510.02 ─ 09
Example:
CAL:RES?
would return, e.g.
Total Calibration Status:
PASSED, Date (dd/mm/yyyy): 12/07/2004,
Time: 16:24:54,Runtime: 00.06
Usage: Query only
Manual operation: See "Show Align Results" on page 177
CALibration:STATe <State>
This command includes or excludes calibration data in the actual measurement.
Parameters:
<State> ON | OFF
Example:
CAL:STAT OFF
Sets up the instrument to ignore the calibration data.
Usage: SCPI confirmed
4.2.4.2 DIAGnostic Subsystem
The DIAGnostic subsystem contains the commands which support instrument diagnos-
tics for maintenance, service and repair. In accordance with the SCPI standard, all of
these commands are device-specific.
DIAGnostic<n>:SERVice:BIOSinfo?.................................................................................916
DIAGnostic<n>:SERVice:HWINfo?.................................................................................. 917
DIAGnostic<n>:SERVice:INPut:PULSed:CFRequency.......................................................917
DIAGnostic<n>:SERVice:INPut:PULSed:MCFRequency....................................................918
DIAGnostic<n>:SERVice:INPut:PULSed:WBFRequency....................................................918
DIAGnostic<n>:SERVice:INPut:PULSed:WB2Frequency................................................... 918
DIAGnostic<n>:SERVice:INPut[:SELect].......................................................................... 919
DIAGnostic<n>:SERVice:NSOurce.................................................................................. 920
DIAGnostic<n>:SERVice:SFUNction................................................................................920
DIAGnostic<n>:SERVice:SFUNction:LASTresult?............................................................. 920
DIAGnostic<n>:SERVice:SFUNction:RESults:DELete........................................................921
DIAGnostic<n>:SERVice:SFUNction:RESults:SAVE..........................................................921
DIAGnostic<n>:SERVice:STESt:RESult?......................................................................... 921
DIAGnostic<n>:SERVice:TEMPerature:FRONt?............................................................... 921
DIAGnostic<n>:SERVice:VERSinfo?................................................................................922
DIAGnostic<n>:SERVice:BIOSinfo?
This command queries the CPU board BIOS version.
Suffix:
<n>
.
irrelevant
Return values:
<Version> ASCII string containing the BIOS version, e.g. 47.11.
Remote Control – Commands