Rohde & Schwarz FSVA - 7.1.8 Mapping Network Drives

Appendix: LAN Interface
R&S
®
FSVA/FSV
1061Operating Manual 1176.7510.02 ─ 09
Switching users when using the automatic login function
Which user account is used is defined during login. However, you can also switch the
user account to be used when the automatic login function is active.
► In the "Start" menu, select the arrow next to the "Shut down" button and then "Log
off".
The "Login" dialog box is displayed, in which you can enter the different user
account name and password.
7.1.8 Mapping Network Drives
1. Press the SAVE/ RCL key on the front panel of the R&S FSVA/FSV.
2. Press the "File Manager" softkey.
3. Press the "More" softkey.
4. Press the "Network Drive" softkey.
The "Map Network Drive" dialog box is displayed.
5. Press the "Drive" list to open the network drive list and select the drive you want to
map.
Alternatively:
● Press the "Map Network Drive" softkey to set the focus on the "Drive" list.
● Press ENTER to open the network drive list and select the drive you want to
map using the arrow keys.
6. To have the connection set up automatically each time the instrument is started, in
the "Map Network Drive" dialog box, activate the "Reconnect at logon" option.
7. To connect using a different user name, activate the "Connect using a different
user name" option.
The "Map Network Drive" dialog box is extended by the "User name" and "Pass-
word" fields.
Configuring the Network