Rohde & Schwarz FSVA - CALCulate:TLINe Subsystem

Remote Control
R&S
®
FSVA/FSV
742Operating Manual 1176.7510.02 ─ 09
Example:
CALC:THR -82DBM
Sets the threshold value to -82 dBm.
Manual operation: See "Threshold" on page 294
CALCulate<n>:THReshold:STATe <State>
This command turns the threshold line for the marker peak search on and off.
Suffix:
<n>
.
irrelevant
Parameters:
<State> ON | OFF
*RST: OFF
Example:
CALC:THR:STAT ON
Switches on the threshold line.
Manual operation: See "Threshold" on page 294
See "Search Lim Off" on page 304
CALCulate:TLINe Subsystem
The CALCulate:TLINe subsystem defines the position of the time lines.
CALCulate<n>:TLINe<Line>........................................................................................... 742
CALCulate<n>:TLINe<Line>:STATe................................................................................ 742
CALCulate<n>:TLINe<Line> <Time>
This command defines the position of a time line.
Suffix:
<n>
.
irrelevant
<Line> 1 | 2
Selects the time line.
Parameters:
<Time> Range: 0 to 30000000000
*RST: (STATe to OFF)
Default unit: s
Example:
CALC:TLIN 10ms
Manual operation: See "Time Line 1 / Time Line 2" on page 420
CALCulate<n>:TLINe<Line>:STATe <State>
This command turns a time line on and off.
Suffix:
<n>
.
irrelevant
Remote Control – Commands