Rohde & Schwarz FSVA - 7.5 Deactivating the R&S FSVA;FSV via Remote Operation

Appendix: LAN Interface
R&S
®
FSVA/FSV
1069Operating Manual 1176.7510.02 ─ 09
Restoring the connection to the R&S FSVA/FSV
Follow the instructions above for setting up a connection to the R&S FSVA/FSV. If the
connection is terminated and then restored, the R&S FSVA/FSV remains in the same
state.
7.5 Deactivating the R&S FSVA/FSV via Remote Opera-
tion
1. Click the R&S FSVA/FSV soft front panel and close the application with the key
combination ALT + F4.
2. Click the desktop and press the key combination ALT + F4.
A safety query is displayed to warn you that the instrument cannot be reactivated
via remote operation and asks you whether you want to continue the shutdown
process.
3. Respond to the safety query with "Yes".
The connection with the controller is terminated and the R&S FSVA/FSV is deacti-
vated.
Deactivating the R&S FSVA/FSV via Remote Operation