Instrument Functions
R&S
®
FSVA/FSV
213Operating Manual 1176.7510.02 ─ 09
Select Print Color Set ← Colors
For details see "Select Print Color Set" on page 189 softkey of the "Setup" menu.
Color (On/Off) ← Colors
For details see "Color (On/Off)" on page 188 softkey of the "Setup" menu.
Select Object ← Colors
For details see "Select Object" on page 188 softkey of the "Setup" menu.
Predefined Colors ← Colors
For details see "Predefined Colors" on page 188 softkey of the "Setup" menu.
User Defined Colors ← Colors
For details see "User Defined Colors" on page 189 softkey of the "Setup" menu.
Set to Default ← Colors
For details see "Set to Default" on page 189 softkey of the "Setup" menu.
Comment
Opens dialog box to enter a comment. Max. 120 characters are allowed. 60 characters
fit in one line. In the first line, at any point a manual line-feed can be forced by entering
"@".
Date and time are inserted automatically. The comment is printed below the diagram
area, but not displayed on the screen. If a comment should not be printed, it must be
deleted.
For details on the alphanumeric entries refer to the R&S FSVA/FSV Quick Start Guide,
"Basic Operations".
Remote command:
HCOPy:ITEM:WINDow:TEXT on page 935
Install Printer
Opens the "Printers and Faxes" window to install a new printer. All printers that are
already installed are displayed.
For further information refer to the R&S FSVA/FSV Quick Start Guide, appendix 1,
"Printer Interface".
Only user accounts with administrator rights can install a printer.
3.1.5 User-Defined Menu – USER key
The USER key displays a user-defined menu. The softkeys displayed here can be
labelled and assigned to user-defined settings files as required.
To open the user-defined menu
► Press the USER key.
The "User" menu is displayed.
General Settings, Printout and Instrument Settings
To Next Page
Loading...
