Rohde & Schwarz FSVA - Page 189

Instrument Functions
R&S
®
FSVA/FSV
189Operating Manual 1176.7510.02 ─ 09
User Defined Colors ← Screen Colors ← Display Setup
In the "Color Setup" dialog box, displays the "User Defined Colors" (alternatively to the
"User Defined Colors" button). This softkey is only available if, in the "Select Color Set"
dialog box, the "User Defined Colors" option is selected or the "Color Setup" dialog box
is displayed. For further details refer to the Quick Start Guide, chapter 2 "Preparing for
Use".
Remote command:
DISPlay:CMAP<item>:HSL on page 924
HCOPy:CMAP<item>:HSL on page 931
Set to Default ← Screen Colors ← Display Setup
Opens the "Set to Default" dialog box to select one of the factory default color settings.
Remote command:
DISPlay:CMAP<item>:DEFault on page 923
HCOPy:CMAP<item>:DEFault on page 931
Print Colors ← Display Setup
Opens a submenu to select the colors for the printout. To facilitate color selection, the
selected color combination is displayed when the menu is entered. The previous colors
are restored when the menu is exited. For details on screen colors refer to the Quick
Start Guide, chapter 2 "Preparing for Use".
The submenu contains the following commands:
●
"Select Print Color Set" on page 189
●
"Color (On/Off)" on page 190
●
"Select Object" on page 213
●
"Predefined Colors" on page 213
●
"User Defined Colors" on page 213
●
"Set to Default" on page 213
Remote command:
HCOPy:CMAP<item>:HSL on page 931
Select Print Color Set ← Print Colors ← Display Setup
Opens the "Select Print Color Set" dialog box to select the color settings for printout.
Screen Colors (Print) Selects the current screen colors for the printout. The background is
always printed in white and the grid in black.
Screen Colors (Hardcopy) Selects the current screen colors without any changes for a hard-
copy. The output format is set via the "Device Setup" on page 212
softkey in the "Print" menu.
Optimized Colors Selects an optimized color setting for the printout to improve the visi-
bility of the colors (default setting). Trace 1 is blue, trace 2 black,
trace 3 green, and the markers are turquoise. The background is
always printed in white and the grid in black.
User Defined Colors Enables the softkeys to define colors for the printout.
Remote command:
HCOPy:CMAP<item>:DEFault on page 931
General Settings, Printout and Instrument Settings