Rohde & Schwarz FSVA - Page 924

Remote Control
R&S
®
FSVA/FSV
924Operating Manual 1176.7510.02 ─ 09
Parameters:
<Setting> 1 | 2
Default settings DEFault1 and DEFault2
Example:
DISP:CMAP:DEF2
Selects default setting 2 for setting the colors.
Usage: Event
SCPI confirmed
Manual operation: See "Select Screen Color Set" on page 188
See "Set to Default" on page 189
DISPlay:CMAP<item>:HSL
<ColorTable>
This command defines the color table of the instrument.
The set values are not changed by *RST.
Suffix:
<item>
.
Selects the display item. For more information see Chap-
ter 4.2.4.4, "CMAP Suffix Assignment", on page 928.
Parameters:
<ColorTable> hue | sat | lum
hue
TINT
sat
SATURATION
lum
BRIGHTNESS
The value range is 0 to 1 for all parameters.
Example:
DISP:CMAP2:HSL 0.3,0.8,1.0
Changes the grid color.
Usage: SCPI confirmed
Manual operation: See "Screen Colors" on page 188
See "Select Object" on page 188
See "User Defined Colors" on page 189
DISPlay:CMAP<item>:PDEFined <Color>
This command defines the color table of the instrument using predefined color values.
Each suffix of CMAP is assigned to one or several graphical elements which can be
modified by varying the corresponding color setting.
The values set are not changed by *RST.
Suffix:
<item>
.
Selects the display item. For more information see Chap-
ter 4.2.4.4, "CMAP Suffix Assignment", on page 928.
Remote Control – Commands