Rohde & Schwarz FSVA - 3.1 General Settings, Printout and Instrument Settings; 3.1.1 Instrument Setup and Interface Configuration - SETUP Key

Instrument Functions
R&S
®
FSVA/FSV
170Operating Manual 1176.7510.02 ─ 09
3.10.2 Softkeys of the Spectrogram Menu.............................................................................555
3.10.3 Configuring Color Settings for Spectrograms..............................................................556
3.10.4 ASCII File Export Format for Spectrograms................................................................561
3.1 General Settings, Printout and Instrument Settings
After putting the instrument into operation and becoming familiar with the handling of
the instrument (for details see Quick Start Guide) the preparations for measurements
can start. In this section the general settings of the instrument, the data management
and the processing of measurement results are described. This includes the following
topics and keys:
3.1.1 Instrument Setup and Interface Configuration – SETUP Key..................................... 170
3.1.1.1 Softkeys of the Setup Menu........................................................................................171
3.1.1.2 Activating or Deactivating the LXI Class C Functionality............................................ 194
3.1.1.3 LXI Class C Functionality............................................................................................195
3.1.2 Saving and Recalling Settings Files – SAVE/RCL Key...............................................196
3.1.2.1 Softkeys of the SAVE/RCL Menu................................................................................197
3.1.2.2 File Selection Dialog Boxes........................................................................................ 203
3.1.2.3 Importing and Exporting I/Q Data................................................................................205
3.1.3 Manual Operation – Local Menu.................................................................................210
3.1.4 Measurement Documentation – PRINT Key............................................................... 211
3.1.5 User-Defined Menu – USER key................................................................................ 213
3.1.1 Instrument Setup and Interface Configuration – SETUP Key
The SETUP key is used to set or display the default settings of the instrument: refer-
ence frequency, noise source, level correction values, date, time, LAN interface, firm-
ware update and enabling of options, information about instrument configuration and
service support functions. For further details refer also to the Quick Start Guide, chap-
ter 2 "Preparing for Use".
To open the Setup menu
► Press the SETUP key.
The "Setup" menu is displayed.
Menu and softkey description
●
Chapter 3.1.1.1, "Softkeys of the Setup Menu", on page 171
General Settings, Printout and Instrument Settings