Rohde & Schwarz FSVA - Measurement Example 2 - Measuring Adjacent Channel Power of a W-CDMA Uplink Signal

Quick Start
R&S
®
FSVA/FSV
160Operating Manual 1176.7510.02 ─ 09
Figure 2-35: Adjacent channel power measurement on a CDMA2000 1x signal
Measurement Example 2 – Measuring Adjacent Channel Power of a W-CDMA
Uplink Signal
Test setup:
Signal generator settings (e.g. R&S SMW):
Frequency: 1950 MHz
Level: 4 dBm
Modulation: 3 GPP W-CDMA Reverse Link
Procedure:
1. Set the R&S FSVA/FSV to its default state by pressing the PRESET key.
Advanced Measurement Examples