Rohde & Schwarz FSVA - Defining and Using a User-Defined Color Set

Quick Start
R&S
®
FSVA/FSV
41Operating Manual 1176.7510.02 ─ 09
DISP:CMAP1 ... 41:PDEF <color>
Defining and Using a User-Defined Color Set
1. In the screen colors submenu (see "Displaying the Screen Colors Submenu"
on page 39), press the "Select Screen Color Set" softkey.
The "Select Screen Color Set" dialog box is displayed.
2. Select the "User Defined Colors" option.
3. In the "Screen Colors" submenu, press the "Select Object" softkey.
The "Screen Color Setup" dialog box is displayed.
4. Press the arrow on the "Selected Object" list and select the object for which you
want to change the color setting.
5. In the color palette, select the color you want to use for the object, or enter values
for tint, saturation and brightness.
The defined color is displayed in the "Preview" box.
Note: In the continuous color spectrum ("Tint") red is represented by 0% and blue
by 100%.
6. Repeat the steps for all objects for which you want to change the color.
Preparing for Use