Remote Control
R&S
®
FSVA/FSV
711Operating Manual 1176.7510.02 ─ 09
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Example:
CALC:MARK2:SGR:Y:MIN
Activates and positions marker 2 on the minimum level of the y-
axis.
CALC:MARK2:SGR:Y:MIN:NEXT
Positions marker 2 on the next minimum level.
Usage: Event
Manual operation: See "Search Mode for Next Peak in Y Direction" on page 305
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum[:PEAK]
This command positions the specified marker on the current minimum level of the verti-
cal axis. The search is performed over all captured frames. It does not change the hori-
zontal position of the delta marker.
The command is available for the spectrogram.
Suffix:
<n>
.
1...4
Selects the measurement window.
<m> 1...16
Selects the marker.
Example:
CALC:MARK2:SGR:Y:MIN
Activates and positions marker 2 on the minimum level of the y-
axis.
Usage: Event
Manual operation: See "Marker Search Type" on page 306
Predefined CP/ACLR Standards
Parameter Standard
W-CDMA 3GPP FWD W-CDMA 3.84 MHz forward
W-CDMA 3GPP REV W-CDMA 3.84 MHz reverse
CDMA IS95A FWD CDMA IS95A forward
CDMA IS95A REV CDMA IS95A reverse
CDMA IS95C Class 0 FWD CDMA IS95C Class 0 forward
CDMA IS95C Class 0 REV CDMA IS95C Class 0 reverse
CDMA J-STD008 FWD CDMA J-STD008 forward
Remote Control – Commands
To Next Page
Loading...
