Rohde & Schwarz FSVA - Selecting the Printout Colors

Quick Start
R&S
®
FSVA/FSV
43Operating Manual 1176.7510.02 ─ 09
3. To change the tab in order to define the second print setting, press the tab on the
screen.
4. Define the output by selecting the required options.
● To save the hardcopy in an image file, select one of the image types. Depend-
ing on the image type, the color depth varies (e.g. 4-bit for BMP, 24-bit for PNG
and JPEG).
● To copy the image to the clipboard, select the "Clipboard" option.
● To use a preconfigured network printer, select the "Printer" option.
Note: The "Name", "Print to File" and "Orientation" fields are only available if the
"Printer" option is selected. You can perform the following steps only with the
"Printer" option selected.
5. In the "Name" field, select the desired printer type.
6. To redirect the output to a postscript file rather than a printer, select the "Print to
file" option.
7. In the "Orientation" field, select the desired orientation.
8. Optionally, activate the "Print Date and Time" option to add this information to the
printout.
9. Click "OK" to accept the settings and to close the dialog box.
Selecting the Printout Colors
1. Press the PRINT key.
Preparing for Use