Appendix: LAN Interface
R&S
®
FSVA/FSV
1059Operating Manual 1176.7510.02 ─ 09
The network administrator is responsible for creating new users in the network.
1. Press the "Windows" key on the external keyboard or the CTRL + ESC key combi-
nation on your keyboard to access the operating system.
2. Select "Start > Control Panel > User Accounts".
3. Select "Give other users access to this computer".
4. In the "User Accounts" dialog box, select "Add".
The "Add New User" dialog box is displayed.
5. Enter the name of the new user and the domain the user belongs to and select
"Next".
6. Define the level of access you want to allow the new user:
● Select "Standard" to create an account with limited rights.
● Select "Administrator" to create an account with administrator rights.
Note: Full firmware functionality requires administrator rights.
7. Select "Finish".
The new user is created.
7.1.5 Changing the User Password
After the new user has been created on the instrument, the password must be adapted
to the network password.
1. Press the "Windows" key on the external keyboard or the CTRL + ESC key combi-
nation on your keyboard to access the operating system.
2. Press CTRL + ALT + DELETE, then select "Change a password".
3. Enter the user account name.
4. Enter the old password.
5. Enter the new password in the upper text line and repeat it in the following line.
6. Press ENTER.
The new password is now active.
7.1.6 Logging on to the Network
At the same time you log on to the operating system, you are automatically logged on
to the network. As a prerequisite, the user name and the password must be identical
under Windows and on the network.
Configuring the Network
To Next Page
Loading...
