Rohde & Schwarz FSVA - 2.1.1.3 Connectors on the Front Panel

Quick Start
R&S
®
FSVA/FSV
15Operating Manual 1176.7510.02 ─ 09
The Figure 2-2 shows the touchscreen display of the R&S FSVA/FSV. The individual
elements are described in more detail in Chapter 2.4, "Basic Operations",
on page 61.
Figure 2-2: Touchscreen elements
1 = Toolbar with standard application functions, e.g. print, save/open file etc.
2 = Tabs for individual measurement tasks
3 = Channel information bar for current measurement settings
4 = Diagram header with diagram-specific (trace) information
5 = Measurement results area
6 = Diagram footer with diagram-specific information, depending on measurement mode
7 = Error indicator
8 = Error message, if available
9 = Device status
10 = Progress bar for measurement
11 = Date and time display
12 = Softkeys for menu access
2.1.1.3 Connectors on the Front Panel
This section describes the front connectors and interfaces of the R&S FSVA/FSV.
Optional connectors and interfaces are indicated by the option name in brackets. Most
connectors on the front panel (except for USB) are located at the bottom right-hand
side.
Front and Rear Panel View