Quick Start
R&S
®
FSVA/FSV
62Operating Manual 1176.7510.02 ─ 09
Figure 2-6: Screen layout of the R&S
FSVA/FSV during analyzer operation
1 = Toolbar
2 = Channel information bar for firmware and measurement settings
3 = Toolbar toggle icon
4 = Diagram header with diagram-specific (trace) information
5 = Diagram area
6 = Diagram footer with diagram-specific information, depending on measurement mode
7 = Device status bar with error messages, progress bar and date/time display
2.4.1.1 Channel Display
Using the R&S FSVA/FSV you can handle several different measurement tasks (chan-
nels) at the same time (although they can only be performed asynchronously). For
each channel, a separate tab is displayed on the screen. In order to switch from one
channel display to another, simply press the corresponding tab.
The icon on the tab label indicates that the displayed trace no longer matches the
current instrument settings. This may be the case, for example, if a trace is frozen and
the instrument settings are changed. As soon as a new measurement is performed, the
icon disappears.
Basic Operations
To Next Page
Loading...
