Quick Start
R&S
®
FSVA/FSV
25Operating Manual 1176.7510.02 ─ 09
2.2.1.2 Accessory List
The instrument comes with the following accessories:
●
Power cable
●
Quick Start Guide
●
CD "R&S FSV Signal and Spectrum Analyzer User Documentation"
2.2.1.3 Placing or Mounting the Instrument
The R&S FSVA/FSV is designed for use under laboratory conditions, either on a bench
top or in a rack.
Bench Top Operation
If the R&S FSVA/FSV is operated on a bench top, the surface should be flat. The
instrument can be used in horizontal position, standing on its feet, or with the support
feet on the bottom extended.
Risk of injury if feet are folded out
The feet may fold in if they are not folded out completely or if the instrument is shifted.
This may cause damage or injury.
●
Fold the feet completely in or completely out to ensure stability of the instrument.
Never shift the instrument when the feet are folded out.
●
When the feet are folded out, do not work under the instrument or place anything
underneath.
●
The feet can break if they are overloaded. The overall load on the folded-out feet
must not exceed 500 N.
Preparing for Use
To Next Page
Loading...
