Quick Start
R&S
®
FSVA/FSV
39Operating Manual 1176.7510.02 ─ 09
If the touchscreen is so out of order that you cannot navigate properly, connect an
external mouse to the R&S FSVA/FSV and follow the steps described below to start re-
alignment.
1. Press the SETUP key.
2. Press the "Alignment" softkey.
3. Press the "Touchscreen Alignment" softkey.
4. Using a finger or any other pointing device, press the 4 markers on the screen.
The touchscreen is aligned according to the executed pointing operations.
2.2.4.5 Setting the Screen Colors
To change the colors of the displayed objects, two default color settings are provided.
Alternatively, you can change the color of objects individually using predefined colors
or using colors of your own definition.
Some color settings are defined by the selected theme, see Chapter 2.4.4.9, "Selecting
a Theme", on page 88, and cannot be changed individually.
Displaying the Screen Colors Submenu
1. Press the SETUP key.
2. Press the "Display Setup" softkey.
3. Press the "More" softkey.
4. Press the "Screen Colors" softkey.
The "Screen Colors" submenu is displayed.
Using the Default Color Settings
To select the default setting for brightness, tint and color saturation of all screen
objects:
1. In the "Screen Colors" submenu (see "Displaying the Screen Colors Submenu"
on page 39), press the "Set to Default" softkey.
The "Set User Colors to Default" dialog box is displayed.
2. Select one of the default color sets. The color schemes are selected in such a
manner that all screen elements are visible optimally regardless whether viewed
from above or below. In the instrument's default setting, "Default Colors 1" is
active.
Remote commands:
Preparing for Use
To Next Page
Loading...
