Rohde & Schwarz FSVA - 3.10.1 General Information

Instrument Functions
R&S
®
FSVA/FSV
552Operating Manual 1176.7510.02 ─ 09
Tasks
●
Chapter 3.10.3, "Configuring Color Settings for Spectrograms", on page 556
Remote Operation
Remote commands for "Spectrogram" measurements are included in the following
subsystems:
●
"CALCulate:DELTamarker:SGRam subsystem" on page 627
●
"CALCulate:MARKer:SGRam subsystem" on page 705
●
"CALCulate:SGRam Subsystem" on page 732
●
Chapter 4.2.4.7, "MMEMory Subsystem", on page 936
3.10.1 General Information.................................................................................................... 552
3.10.2 Softkeys of the Spectrogram Menu.............................................................................555
3.10.3 Configuring Color Settings for Spectrograms..............................................................556
3.10.3.1 Selecting the Color Scheme........................................................................................556
3.10.3.2 Defining the Value Range of the Color Map................................................................557
3.10.3.3 Defining the Shape and Focus of the Color Curve......................................................558
3.10.3.4 Color Mapping Dialog..................................................................................................560
3.10.4 ASCII File Export Format for Spectrograms................................................................561
3.10.1 General Information
This section provides some basic information about using the firmware application and
about performing measurements with the firmware application.
Screen Layout
The Spectrogram view is divided into two screens: the spectrum analyzer result display
(upper screen) and the spectrogram result display (lower screen).
Instrument Functions - Spectrogram Measurements