Rohde & Schwarz FSVA - 4.2.4.12 SYSTem Subsystem

Remote Control
R&S
®
FSVA/FSV
960Operating Manual 1176.7510.02 ─ 09
STATus:QUEue[:NEXT?]?
This command queries the earliest error queue entry and deletes it.
Positive error numbers indicate device-specific errors, negative error numbers are error
messages defined by SCPI. If the error queue is empty, the error number 0, "No error",
is returned. This command is identical to the SYSTem:ERRor[:NEXT]? command.
Example:
STAT:QUES?
Usage: Query only
SCPI confirmed
Mode: all
4.2.4.12 SYSTem Subsystem
This subsystem contains a series of commands for general functions.
SYSTem:APPLication:SRECovery[:STATe]...................................................................... 961
SYSTem:CLOGging....................................................................................................... 961
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess............................................................... 961
SYSTem:COMMunicate:GPIB[:SELF]:RTERminator..........................................................962
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?........................................................ 962
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?...................................................... 963
SYSTem:COMMunicate:PRINter:SELect <1|2>.................................................................963
SYSTem:COMMunicate:TCPip:CONTrol?........................................................................ 963
SYSTem:COMPatible.....................................................................................................963
SYSTem:DATE..............................................................................................................964
SYSTem:DID?...............................................................................................................964
SYSTem:DEVice:ID?......................................................................................................964
SYSTem:DISPlay:FPANel...............................................................................................964
SYSTem:DISPlay:LANGuage..........................................................................................965
SYSTem:DISPlay:UPDate.............................................................................................. 965
SYSTem:ERRor:CLEar:ALL............................................................................................965
SYSTem:ERRor:LIST?................................................................................................... 965
SYSTem:ERRor[:NEXT]?................................................................................................966
SYSTem:FIRMware:UPDate........................................................................................... 966
SYSTem:FORMat:IDENt.................................................................................................966
SYSTem:HPCoupling..................................................................................................... 967
SYSTem:IDENtify:FACTory.............................................................................................967
SYSTem:IDENtify[:STRing].............................................................................................967
SYSTem:IFGain:MODE..................................................................................................968
SYSTem:KLOCk............................................................................................................968
SYSTem:LANGuage...................................................................................................... 968
SYSTem:LXI:INFo?........................................................................................................969
SYSTem:LXI:LANReset..................................................................................................969
SYSTem:LXI:MDEScription.............................................................................................969
SYSTem:LXI:PASSword.................................................................................................970
SYSTem:PASSword[:CENable]....................................................................................... 970
SYSTem:PASSword:RESet............................................................................................ 970
SYSTem:PRESet...........................................................................................................970
Remote Control – Commands