Rohde & Schwarz FSVA - Page 969

Remote Control
R&S
®
FSVA/FSV
969Operating Manual 1176.7510.02 ─ 09
Parameters:
<Language> "SCPI" | "8560E" | "8561E" | "8562E" | "8563E" | "8564E" |
"8565E" | "8566A" | "8566B" | "8568A" | "8568A_DC" | "8568B" |
"8568B_DC" | "8591E" | "8594E" | "71100C" | "71200C" |
"71209A" | "PSA89600" | "PSA" | "ESA"
*RST: SCPI
Example:
SYST:LANG '8560E'
Sets the system language to 8560E to simulate the HP analyzer.
Manual operation: See "GPIB Language" on page 181
Note
: If you use "PSA89600", you must switch to an HP language first before return-
ing to SCPI (in remote operation only). For the identical language "PSA", this inter-
mediate step is not necessary.
SYSTem:LXI:INFo?
This query returns the current parameters of the LXI class C.
Only user accounts with administrator rights are able to use LXI functionality.
Return values:
Return values
(example)
<current version> | <LXI class> | <Computername> |
<MAC adress> | <IP adress> | <Auto MDIX>
Usage: Query only
Manual operation: See "Info" on page 179
SYSTem:LXI:LANReset
This command resets the LAN configuration to the values required by the LXI stan-
dard. In addition, the password is reset to its initial state aas well as the LXI instrument
description.
Only user accounts with administrator rights are able to use LXI functionality.
Example:
SYST:LXI:LANR
Usage: Event
Manual operation: See "LAN Reset" on page 180
SYSTem:LXI:MDEScription <String>
This command shows the LXI instrument description. Also, the instrument description
can be changed using this command.
Only user accounts with administrator rights are able to use LXI functionality.
Parameters:
<String>
Example:
SYST:LXI:MDES
Remote Control – Commands