Instrument Functions
R&S
®
FSVA/FSV
181Operating Manual 1176.7510.02 ─ 09
"R&S FSU"
Compatible to R&S FSU, see "Mode R&S FSU" on page 181
Remote command:
SYSTem:COMPatible on page 963
Mode Default ← Compatibility Mode ← GPIB ← General Setup
Resets the number of measurement points and available bandwidths to default
R&S FSVA/FSV values.
Remote command:
SYST:COMP DEF, see SYSTem:COMPatible on page 963
Mode R&S FSP ← Compatibility Mode ← GPIB ← General Setup
Sets the number of measurement points and available bandwidths as in R&S FSP
devices.
Remote command:
SYST:COMP FSP, see SYSTem:COMPatible on page 963
Mode R&S FSU ← Compatibility Mode ← GPIB ← General Setup
Sets the number of measurement points and available bandwidths as in R&S FSU
devices.
Remote command:
SYST:COMP FSU, see SYSTem:COMPatible on page 963
GPIB Language ← Compatibility Mode ← GPIB ← General Setup
Opens a list of selectable remote-control languages:
Language Comment
SCPI
71100C Compatible to 8566A/B
71200C Compatible to 8566A/B
71209A Compatible to 8566A/B
8560E
8561E
8562E
8563E
8564E
8565E
8566A Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
8566B
8568A Command sets A and B are available. Command sets A and B differ in the rules
regarding the command structure.
8568A_DC Uses DC input coupling by default if supported by the instrument
General Settings, Printout and Instrument Settings
To Next Page
Loading...
