Remote Control
R&S
®
FSVA/FSV
964Operating Manual 1176.7510.02 ─ 09
Example:
SYST:COMP FSP
Usage: SCPI confirmed
Manual operation: See "Compatibility Mode" on page 180
See "Mode Default" on page 181
See "Mode R&S FSP" on page 181
See "Mode R&S FSU" on page 181
SYSTem:DATE <Date>
This command is used to enter the date for the internal calendar.
The sequence of entry is year, month, day.
Only user accounts with administrator rights can set the date.
Parameters:
<Date> 1980 to 2099, 1 to 12, 1 to 31
Example:
SYST:DATE 2000,6,1
Usage: SCPI confirmed
Manual operation: See "Time+Date" on page 184
SYSTem:DID?
SYSTem:DEVice:ID?
Returns the unique ID of the R&S FSVA/FSV instrument.
Example:
SYST:DEV:ID?
1307.9002K07-100123-aZ
Usage: Query only
SCPI confirmed
Manual operation: See "Versions+Options" on page 190
SYSTem:DISPlay:FPANel <State>
This command activates or deactivates the display of the front panel keys on the
screen.
With the display activated, the instrument can be operated on the screen using the
mouse by pressing the corresponding buttons.
Parameters:
<State> ON | OFF
*RST: OFF
Example:
SYST:DISP:FPAN ON
Manual operation: See "Soft Frontpanel" on page 185
Remote Control – Commands
To Next Page
Loading...
