Instrument Functions
R&S
®
FSVA/FSV
185Operating Manual 1176.7510.02 ─ 09
Language ← General Setup
Changes the language of the graphical user interface (softkeys, dialog boxes, input
settings etc.) to the selected language, if any other than the default are installed.
Note: to change the default input language (English) of an external keyboard, use the
standard Windows operating system function. To access the Windows operating sys-
tem, press the Windows key on the external keyboard. Select "Start" > "Control Panel"
> "Clock, Language, and Region" > "Change keyboards or other input methods" to
configure the keyboard properties.
Remote command:
SYSTem:DISPlay:LANGuage on page 965
Configure Monitor ← General Setup
Determines and displays the configuration of a connected external monitor, if available.
In the configuration dialog box, you can switch from the internal monitor (laptop icon) to
the external monitor (monitor icon), or both (double monitor icon). For external, the
R&S FSVA/FSV display is disabled (turns dark). The screen content formerly displayed
on the R&S FSVA/FSV is displayed on the external screen.
For further details refer to the Quick Start Guide, chapter 2 "Preparing for Use".
Soft Frontpanel ← General Setup
Activates or deactivates the display of the instrument emulation.
deactivated Only the measurement screen is displayed. This is the setting for working at the
R&S FSVA/FSV.
activated In addition to the measurement screen, the whole front panel is displayed, i.e. the
hardkeys and other hardware controls of the device are simulated on the screen.
This is the setting for working at a computer with Remote Desktop or at an external
monitor.
General Settings, Printout and Instrument Settings
To Next Page
Loading...
