Rohde & Schwarz FSVA - Page 931

Remote Control
R&S
®
FSVA/FSV
931Operating Manual 1176.7510.02 ─ 09
Example:
HCOP:ABOR
Usage: Event
SCPI confirmed
HCOPy:CMAP<item>:DEFault <ColorSet>
This command defines the color scheme for print jobs.
Suffix:
<item>
.
Selects the item for which the color scheme is to be defined.
For details on the CMAP assignment refer to Chapter 4.2.4.4,
"CMAP Suffix Assignment", on page 928.
Parameters:
<ColorSet> 1 | 2 | 3 | 4
1
current screen colors with the background in white and the grid
in black.
2
optimized color set
3
user defined color set
4
current screen colors without any changes (setting for hardcop-
ies)
Example:
HCOP:CMAP:DEF2
Selects the optimized color set for the color settings of a printout
or a hardcopy.
Usage: Event
SCPI confirmed
Manual operation: See "Set to Default" on page 189
See "Select Print Color Set" on page 189
HCOPy:CMAP<item>:HSL
This command selects the color for various screen elements in print jobs.
The values set are not changed by *RST.
Suffix:
<item>
.
Selects the item for which the color scheme is to be defined.
For details on the CMAP assignment refer to Chapter 4.2.4.4,
"CMAP Suffix Assignment", on page 928.
Remote Control – Commands