Remote Control
R&S
®
FSVA/FSV
932Operating Manual 1176.7510.02 ─ 09
Parameters:
hue | sat | lum
hue
tint
sat
saturation
lum
brightness
The value range is 0 to 1 for all parameters.
Example:
HCOP:CMAP2:HSL 0.3,0.8,1.0
Changes the grid color
Usage: SCPI confirmed
Manual operation: See "Select Object" on page 188
See "User Defined Colors" on page 189
See "Print Colors" on page 189
HCOPy:CMAP<item>:PDEFined <Color>
This command selects a predefined color for various screen elements in print jobs.
The values set are not changed by *RST.
Suffix:
<item>
.
Selects the item for which the color scheme is to be defined.
For details on the CMAP assignment refer to Chapter 4.2.4.4,
"CMAP Suffix Assignment", on page 928.
Parameters:
<Color> BLACk | BLUE | BROWn | GREen | CYAN | RED | MAGenta |
YELLow | WHITe | DGRAy | LGRAy | LBLUe | LGREen |
LCYan | LRED | LMAGenta
Example:
HCOP:CMAP2:PDEF GRE
Usage: SCPI confirmed
Manual operation: See "Predefined Colors" on page 188
HCOPy:DESTination<1|2> <Medium>
This command selects the destination of a print job.
The type of instrument is selected with SYSTem:COMMunicate:PRINter:
SELect <1|2>, which automatically selects a default output medium. Therefore
HCOPY:DESTination should always be sent after setting the device type.
The suffix <1|2> selects the printing device.
Remote Control – Commands
To Next Page
Loading...
