Rohde & Schwarz FSVA - Page 935

Remote Control
R&S
®
FSVA/FSV
935Operating Manual 1176.7510.02 ─ 09
If you are printing to a file, the file name depends on MMEMory:NAME. This command
adds a consecutive number to the file name.
The suffix <1|2> selects the printing device.
Example:
HCOP:DEV:LANG BMP
Selects the data format.
HCOP:DEST 'MMEM'
Directs the hardcopy to a file.
MMEM:NAME 'C:\R_S\instr\user\Print.bmp'
Selects the file name.
HCOP
Saves the hardcopy output into the file Print.bmp.
HCOP:NEXT
Saves the hardcopy output into the file Print_001.bmp.
HCOP:NEXT
Saves the hardcopy output into the file Print_002.bmp.
Usage:
Event
SCPI confirmed
Manual operation: See "Print Screen" on page 211
HCOPy:ITEM:ALL
This command includes all screen elements in the printout.
The screen elements include comments, title, time and date.
Example:
HCOP:ITEM:ALL
Usage: Event
SCPI confirmed
Manual operation: See "Print Screen" on page 211
HCOPy:ITEM:WINDow:TABLe:STATe <State>
This command turns printing of the currently active table on and off.
Parameters:
<State> ON | OFF
*RST: OFF
Example:
HCOP:ITEM:WIND:TAB:STAT ON
HCOPy:ITEM:WINDow:TEXT <Comment>
This command defines a comment added to the printout.
Parameters:
<Comment> String containing the comment with a maximum of 100 charcat-
ers. The line feed is by means of the characters @.
Remote Control – Commands