Rohde & Schwarz FSVA - Page 944

Remote Control
R&S
®
FSVA/FSV
944Operating Manual 1176.7510.02 ─ 09
Parameters:
<FileSource>,<FileDestination><file_source>,<file_destination> = <file_name> = DOS file name
The file name includes indication of the path and may also
include the drive. The path name complies with DOS conven-
tions.
Example:
MMEM:MOVE 'C:\TEST01.CFG','SETUP.CFG'
Renames TEST01.CFG in SETUP.CFG in directory C:\.
MMEM:MOVE 'C:\TEST01.CFG','C:\R_S\Instr\user
Moves TEST01.CFG from C:\ to C:\R_S\Instr\user.
MMEM:MOVE 'C:\TEST01.CFG','C:
\R_S\Instr\user\SETUP.CFG'
Moves TEST01.CFG from C:\ to C:\R_S\Instr\user and renames
the file in SETUP.CFG.
Usage: Event
SCPI confirmed
Manual operation: See "Rename" on page 202
MMEMory:MSIS <Device>
This command changes to the drive indicated. The drive may be the internal hard disk
C:.
Parameters:
<Device> <device> = A: | C: … Z:
*RST: "C:
The path name complies with DOS conventions.
Example:
MMEM:MSIS 'C:'
Usage: SCPI confirmed
Manual operation: See "Edit Path" on page 201
MMEMory:NAME <FileName>
This command defines a destination file for the printout started with the HCOPy[:
IMMediate<1|2>] on page 934 command. In this case the printer output must be
routed to a file as destination.
Parameters:
<FileName> <file_name> = DOS file name
The file name includes indication of the path and may also
include the drive name. The file name and path information com-
ply with DOS conventions.
Example:
MMEM:NAME 'C:\R_S\instr\user\PRINT1.BMP'
Selects the file name.
Usage: Event
SCPI confirmed
Remote Control – Commands