Instrument Functions
R&S
®
FSVA/FSV
201Operating Manual 1176.7510.02 ─ 09
Remote command:
FORMat:DEXPort:DSEParator on page 755
IQ Export ← Export
Opens a file selection dialog box to select an export file to which the IQ data will be
stored. This function is only available in single sweep mode.
For details see Chapter 3.1.2.3, "Importing and Exporting I/Q Data", on page 205.
Remote command:
MMEMory:STORe:IQ:STATe on page 769
MMEMory:STORe:IQ:COMM on page 769
Import
Provides functions to import data.
IQ Import ← Import
Opens a file selection dialog box to select an import file that contains IQ data. This
function is only available in single sweep mode.
For details see Chapter 3.1.2.3, "Importing and Exporting I/Q Data", on page 205.
Remote command:
MMEMory:LOAD:IQ:STATe on page 769
File Manager
Opens the "File Manager" dialog box and a submenu to manage mass storage media
and files. In the upper left corner, the current drive is displayed. Below the folders and
subfolders of the current directory are displayed.
For details on navigation see also Chapter 3.1.2.2, "File Selection Dialog Boxes",
on page 203.
The following tasks can be performed:
●
copying files from flash disk to other media
●
copying files into another directory
●
renaming and deleting files
Edit Path ← File Manager
Opens the directory list to select the drive and folder for the file to be stored or loaded.
The default path is C:\r_s\instr\user.
Remote command:
MMEMory:MSIS on page 944
MMEMory:CDIRectory on page 939
New Folder ← File Manager
Creates a new folder and opens an edit dialog box to enter name and path (absolute or
relative to the current directory) of the new folder.
Remote command:
MMEMory:MDIRectory on page 943
General Settings, Printout and Instrument Settings
To Next Page
Loading...
