Instrument Functions
R&S
®
FSVA/FSV
200Operating Manual 1176.7510.02 ─ 09
Startup Recall (On/Off) ← Startup Recall
Activates or deactivates the startup recall function. If activated, the settings stored in
the file selected via the Select Dataset softkey are loaded when booting or for preset. If
deactivated, the default settings are loaded.
Remote command:
MMEMory:LOAD:AUTO on page 942
Select Dataset ← Startup Recall
Opens the "Startup Recall" dialog box to select the settings file for the startup recall
function.
ScreenShot
Saves the current measurement screen as a file (screenshot). This function can also
be performed via the "Screenshot" icon in the toolbar, if available.
Remote command:
HCOPy[:IMMediate<1|2>] on page 934
Export
Opens a submenu to configure data export.
ASCII Trace Export ← Export
Opens the "ASCII Trace Export Name" dialog box and saves the active trace in ASCII
format to the specified file and directory.
The file consists of the header containing important scaling parameters and a data sec-
tion containing the trace data. For details on an ASCII file see Chapter 3.2.8.7, "ASCII
File Export Format", on page 266.
This format can be processed by spreadsheet calculation programs, e.g. MS-Excel. It
is necessary to define ';' as a separator for the data import. Different language versions
of evaluation programs may require a different handling of the decimal point. It is there-
fore possible to select between separators '.' (decimal point) and ',' (comma) using the
"Decim Sep" softkey (see "Decim Sep" on page 200).
If the spectrogram display is selected when you perform this function, the entire histo-
gram buffer with all frames is exported to a file. The data corresponding to a particular
frame begins with information about the frame number and the time that frame was
recorded. For large history buffers the export operation may take some time.
For details see Chapter 3.10.4, "ASCII File Export Format for Spectrograms",
on page 561.
Remote command:
FORMat:DEXPort:DSEParator on page 755
MMEMory:STORe<n>:TRACe on page 771
MMEMory:STORe:SGRam on page 770
Decim Sep ← Export
Selects the decimal separator with floating-point numerals for the ASCII Trace export
to support evaluation programs (e.g. MS-Excel) in different languages. The values '.'
(decimal point) and ',' (comma) can be set.
General Settings, Printout and Instrument Settings
To Next Page
Loading...
