Rohde & Schwarz FSVA - Page 199

Instrument Functions
R&S
®
FSVA/FSV
199Operating Manual 1176.7510.02 ─ 09
In the "Recall" dialog box, the items saved in the selected file are displayed.
Remote command:
MMEMory:SELect[:ITEM]:HWSettings on page 947
MMEMory:SELect[:ITEM]:LINes:ALL on page 947
MMEMory:SELect[:ITEM]:TRACe[:ACTive] on page 948
MMEMory:SELect[:ITEM]:TRANsducer:ALL on page 948
Enable all Items ← Select Items ← Save
Selects all items for saving or loading.
Remote command:
MMEMory:SELect[:ITEM]:ALL on page 946
Disable all Items ← Select Items ← Save
Selects none of the items for saving or loading.
Remote command:
MMEMory:SELect[:ITEM]:NONE on page 947
Delete File ← Save
Deletes the selected settings file.
Remote command:
MMEMory:CLEar:STATe 1, on page 939
Recall
Opens the "Recall" dialog box to load a settings file. To navigate in the dialog box, use
the corresponding softkeys.
For details see also Chapter 3.1.2.2, "File Selection Dialog Boxes", on page 203.
Path Directory from which the settings file is loaded. The default path for user
settings files is C:\r_s\instr\user
Files List of stored settings files
File Name Name of settings file
Comment Comment of the settings file
[Items] Items saved in the settings file
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the UNDO/REDO
keys.
Remote command:
MMEMory:LOAD:STATe on page 942
Startup Recall
Opens a submenu to activate or deactivate and set up the startup recall function.
General Settings, Printout and Instrument Settings