Instrument Functions
R&S
®
FSVA/FSV
198Operating Manual 1176.7510.02 ─ 09
└ Date.................................................................................................... 202
└ Extension............................................................................................202
└ Size.....................................................................................................202
└ File Lists (1/2)............................................................................................... 202
└ Current File List (1/2).................................................................................... 202
└ Network Drive............................................................................................... 202
└ Map Network Drive............................................................................. 203
└ Disconnect Network Drive.................................................................. 203
Save
Opens the "Save" dialog box to define which measurement settings and results to
store. To navigate in the dialog box and define/enter data, use the corresponding soft-
keys.
For details see also Chapter 3.1.2.2, "File Selection Dialog Boxes", on page 203.
Save File / Recall File ← Save
Saves the settings file with the defined file name ("Save" dialog box), or recalls the
selected settings file ("Recall" dialog box).
You can assign stored settings files to user-definable softkeys in the "User" menu for
easy access, see Chapter 3.1.5, "User-Defined Menu – USER key", on page 213 .
Remote command:
MMEMory:STORe<n>:STATe on page 948
MMEMory:STORe<n>:STATe:NEXT on page 949
MMEMory:LOAD:STATe on page 942
Select Path ← Save
Opens the directory list to select the drive and folder for the settings file to be stored or
loaded. The default path is C:\r_s\instr\user.
Select File ← Save
Sets the focus on the "Files" list.
Remote command:
MMEMory:CATalog? on page 937
Edit File Name ← Save
Sets the focus on the "File Name" field.
Edit Comment ← Save
Sets the focus on the "Comment" field to enter a comment for the settings file. Max. 60
characters are allowed.
Select Items ← Save
Displays the submenu for selecting the items to be stored or loaded.
Select Items ← Select Items ← Save
Sets the focus on the items list. Which items are available depends on the installed
options.
In the "Save" dialog box, all items that can be saved are displayed.
General Settings, Printout and Instrument Settings
To Next Page
Loading...
