Rohde & Schwarz FSVA - Page 948

Remote Control
R&S
®
FSVA/FSV
948Operating Manual 1176.7510.02 ─ 09
Parameters:
<boolean> ON | OFF
*RST: OFF
Example:
MEM:SEL:SGR ON
Adds the spectrogram data to the list of data subsets.
Mode: SPECM
MMEMory:SELect[:ITEM]:TRACe[:ACTive] <State>
This command includes the active traces in the settings file to be stored/loaded. Active
traces are all traces whose state is not blank.
Parameters:
<State> ON | OFF
*RST: OFF, i.e. no traces is stored
Example:
MMEM:SEL:TRAC ON
Manual operation: See "Select Items" on page 198
MMEMory:SELect[:ITEM]:TRANsducer:ALL <State>
This command includes all transducer factors and sets in the settings file to be stored/
loaded.
Parameters:
<State> ON | OFF
*RST: OFF
Example:
MMEM:SEL:TRAN:ALL ON
Manual operation: See "Select Items" on page 198
MMEMory:STORe<n>:STATe <State>
This command stores the current device settings in a *.dfl file.
Suffix:
<n>
.
irrelevant
Parameters:
<State> 1,<file_name>
with <file_name>
DOS file name with or without extension
The file name includes the indication of the path and may also
include the drive name. The path name complies with DOS con-
ventions.
Example:
MMEM:STOR:STAT 1,'Save'
Saves the current device settings in the file Save.dfl.
Remote Control – Commands